Samsung SMX-K400BN, SMX-K400SN Viewing on a TV Screen, To the Anynet+ support TV, 98English

connecting to other devices

VIEWING ON A TV SCREEN

You can enjoy widescreen recordings on an HDTV (or a regular TV).

1. Turn on the TV and set the input selector to the input connection the camcorder is connected to.

•Refer to your TV's instruction manual to see how to set the input selector

on your TV.

2. Select the playback mode on your camcorder and start to playback videos.

• Press the MODEbutton to select the Play mode. ➥page 23

• This camcorder supports the Anynet+ function, therefore, you can use the same remote control for both devices if connected with HDMI cable

to the Anynet+ support TV. ➥page 94

•Adjust the volume to a moderate level. If the volume is too high, the video information may include noise.

•If the “TVDisplay” is set “Off”, the TV screen will not display the camcorder's OSD (On Screen Display) menus. ➥page 93

•You will only hear audio from the camcorder on your TV in Video playback mode.

•If you record videos in 4:3 mode, then connect the camcorder to an HDTV via HDMI, your videos will play back in 16:9 mode.

Image display depending on LCD and TV screen ratio			Icon	Subject
Video	Photo	LCD	TV
			16:9	4:3
16:9
4:3

Refer to page 56 for the "16:9Wide" setting.

98_English