Samsung SMX-K400BN, SMX-K400SN, SMX-K400LN user manual Playback, 116English, What is condensation?

troubleshooting

Playback

Message	Icon	Informs that...	Action
Read Error	-	Some problems occurred during reading	• Format storage media using menus after
		data from storage media.	backing up important files to PC or another
			storage device.
The Number of		Folder and files have reached capacity	• Format the storage media using the menu after
video files is full.	-		backing up important files to your PC or another
		and you can not record.
Cannot copy videos.			storage device. Set "File No." to "Reset."
The Number of		Folder and files have reached their	• Format storage media using the menu item after
photo files is full.	-		backing up important files to your PC or another
		capacity and you cannot take a picture.
Cannot copy photos.			storage device. Set "File No." to "Reset."

	When there is condensation, put the camcorder aside for a while before using
CAUTION	•	What is condensation?
		Condensation occurs when a camcorder is moved to a place where the temperature differs significantly from the

previous place. In other words, the water vapor in the air turns into dew because of the temperature difference, and it condensates like dew on the external or internal lenses of the camcorder and on the reflection lens. When this happens, you temporarily may not use the record or play functions of the camcorder. Also, it may cause a malfunction or damage to the camcorder when using the device with the power on while there is condensation.

•What can I do?

Turn the power off and detach the battery pack, and leave it in a dry area for 1~2 hours before using it.

•When does condensation occur?

When the device is relocated to a place with a higher temperature than the previous location, or when using it in a hot area suddenly.

-When recording outdoors in cold weather during the winter and then using it in indoors.

-When recording outdoors in hot weather after being indoors or inside a car where the air conditioner was

running.

Note before sending your camcorder for repair.

•If these instructions do not solve your problem, contact your nearest Samsung authorised service center.

•Depending on the problem, the camcorder's built-in memory (SMX-K44/K45 only) may need to be initialized or replaced and the data will be deleted. Be sure to back up the data on the camcorder to other storage media before sending your camcorder in for repair. Samsung cannot guarantee any loss of your data.

116_English