settings options
DemoDemonstration automatically shows you the major features that are included with your camcorder so that you may use them more easily.
settings | contents | ||
display | |||
|
| ||
"Off" | Disables the function | None | |
|
|
| |
"On" | Activates demonstration mode and shows various features on the LCD screen. | None | |
|
|
|
However, the camcorder will enter the Demo mode automatically after 5 minutes in STBY mode if it is idle for 5 minutes without operation. If you don’t want the Demo function to start, set “Demo” to “Off”.
The Demo function does not operate in the following cases:-If “Auto Power Off” is set to “5 Min”(uses the battery as main power), the Auto Power Off function will turn the camcorder off before Demo can run.
Anynet+This camcorder supports Anynet+. Anynet+ is an AV network system that enables you to control all connected Samsung AV devices with an Anynet+ supported Samsung TV remote control.
settings |
| contents | |
| display | ||
|
|
| |
"Off" | Disables the function |
| None |
|
|
|
|
"On" | The Anynet+ function is enabled. |
| None |
|
|
|
|
•When you turn on the camcorder that is connected to an Anynet+ supporting TV with an HDMI cable, the TV (Anynet+ supported) is automatically turned on. If you do not want to use this Anynet+ function, set the “Anynet+
•For details on the Anynet+