preparation
This section provides information that you should know before using this camcorder: such as how to use the provided accessories, how to charge the battery, and how to setup the operation mode and initialise setup.
ATTACHING THE GRIP BELT
Adjust the length of grip belt so that the camcorder is stable when you | 1 | 2 | |
press the Recording start/stop button with your thumb. | |||
| Please note if the hand strap is adjusted too tight and you use |
|
|
WARNING | excessive force to insert your hand, the hand strap hook of the |
|
|
camcorder may be damaged. |
|
| |
|
|
| |
ATTACHING THE CORE FILTER
Attach the core fi lters to the cables. The core fi lter reduces interference.
1.To open the core fi lter, release the stoppers on both ends of the core fi lter.
2.Attach the core fi lter to the cable near its connecter as shown in the diagram.
3.Close the core fi lter until it clicks shut.
•Take care not to damage the cable.
•When connecting a cable, attach the end with the core fi lter to the camcorder.
ADJUSTING THE LCD SCREEN
1 | 2 | a USB cable | Core Filter | 3 |
|
| Wind the cable so that it is not slack. | ||
Stopper |
| a mini HDMI cable |
|
|
The wide LCD screen on your camcorder offers high quality image viewing.
1. | Open the LCD screen with your fi nger. |
|
2. | • The screen opens up to 90°. |
|
Rotate the LCD screen towards the lens. |
| |
| • You can rotate it up to 180° towards the lens and up to 90° backward. To view recordings | |
|
| |
|
| |
|
| |
| more conveniently, rotate the screen by 180° towards the lens, then fold it back to the body. |
|
Excessive rotation may damage the connective hinge between the screen and the
WARNING camcorder.
•When the LCD screen is rotated by 180°, the left and right sides of the subject are shown in reverse, which produces horizontally fl ipped image.
• Remove fi ngerprints or dust on the screen with a soft cloth.