Samsung SMX-K44SN, SMX-K45SN Demo, Anynet+ HDMI-CEC, Settings, Anynet+ function is enabled

settings options

Demo

Demonstration automatically shows you the major features that are included with your camcorder so that you may use them more easily.

settings	contents	on-screen
		display
"Off"	Disables the function	None
"On"	Activates demonstration mode and shows various features on the LCD screen.	None

Using the Demo function

•The Demo mode is canceled in the following cases:

-If any button is operated (Recording start/stop, PHOTO, EASY Q, etc.)

However, the camcorder will enter the Demo mode automatically after 5 minutes in STBY mode if it is idle for 5 minutes without operation. If you don’t want the Demo function to start, set “Demo” to “Off”.

The Demo function does not operate in the following cases:

-If “Auto Power Off” is set to “5 Min”(uses the battery as main power), the Auto Power Off function will turn the camcorder off before Demo can run.

Anynet+ (HDMI-CEC)

This camcorder supports Anynet+. Anynet+ is an AV network system that enables you to control all connected Samsung AV devices with an Anynet+ supported Samsung TV remote control.

settings	contents
"Off"	Disables the function
"On"	The Anynet+ function is enabled.

on-screen

display

None

None

•When you turn on the camcorder that is connected to an Anynet+ supporting TV with an HDMI cable, the TV (Anynet+ supported) is automatically turned on. If you do not want to use this Anynet+ function, set the “Anynet+ (HDMI-CEC)”to “Off.”

•For details on the Anynet+ (HDMI-CEC) function, refer to the user manual of Samsung’s Anynet+ supported TV.

94_English