Samsung SMX-K40BP, SMX-K45BP, SMX-K44SP Date/Time Display to on, Set the Beep Sound to On

Recording

Symptom		Explanation/Solution
When the screen is exposed to
direct sunlight during recording,	•	Do not leave the camcorder with the LCD screen exposed to direct sunlight.
the screen turns red or black for an
instant.
During recording, the date/time	•	"Date/Time Display" to on. ➥page 89
does not display.
	• Set the "Beep Sound" to "On."
The beep sound is not heard.	•	The beep sound is temporally off while recording videos.
	•	When the Audio/Video cable jack is connected to the camcorder, the beep
		sound will automatically turn off.
There is a time difference between
the point where you press	•	On your camcorder, there may be a slight time delay between the point
Recording start/stop button and		when you press Recording start/stop button and the actual point where
the point where the recorded video		the recorded video starts/stops. This is not an error.
starts/stops.
	• The internal temperature of your camcorder is unusually high. Turn off your
The recording stops.		camcorder and leave it for a while in a cool place.
	•	Your camcorder is damp and moist inside (condensation). Turn off your
		camcorder and leave it for about 1 hour in a cool place.
	• Set your camcorder to Record mode. ➥page 23
	• Release the lock on the write-protection tab of the memory card if set.
You cannot record a photo image.	•	The storage media is full.
		Use a new memory card or format the storage media. ➥page 85
		Or remove unnecessary images. ➥page 72
		English_121