Samsung SMX-K40LP Turning the Screen Indicators ON/OFF, Using the LCD Enhancer Function

preparation

TURNING THE SCREEN INDICATORS ON/OFF ( )

Switching the information display mode

•You can switch the on-screen information display mode: Press the Display ( ) button while the camcorder is on. The full and minimum display modes will alternate.

•Full display mode: All relevant information will appear.

Minimum display mode: Only operating status indicators will appear.

vmmu

• If the camcorder has warning information, a warning message will appear. STBY

•In the menu screen, the Display ( ) button will be deactivated.

•To activate iVIEW function, press the Display ( ) button in thumbnail index view screen. ➥page 75

<Minimum display mode>

USING THE LCD ENHANCER FUNCTION

•Contrast is enhanced for a clear and bright image. This effect is also implemented outdoors in bright daylight.

•You can also adjust the screen brightness in two-level increments, which provides a

brighter screen than using just one-level increment for your recording.

1.Press the LCD ENHANCER ( ) button.

•LCD adjust (  ) indicator appears and the LCD brightens.

vmmu

2.You can switch the LCD enhancer function in the following order each time you press the LCD ENHANCER ( ) button.

•LCD enhancer 1-level (  ): LCD enhancer is executed.

•LCD enhancer 2-level (  ): You can make a brighter-screen than using just one-level

adjustment.

•LCD enhancer function does not affect the quality of the image being recorded.

•When LCD enhancer works at the low illumination, some stripes may occur on the LCD screen. It is not a malfunction.

•Using the LCD Enhancer function may cause colour looks different on the display.

STBY 0:00:00 [475Min]

9999

30_English