Samsung SNC-B2331P manual Rear Side, System, Power, Gnd

overview

Rear Side

SYSTEM POWER

VIDEORESET

1 2 3 4 5 NETWORK

1,2	: ALARM IN 1,2	ACT
3	: GND
4,5	: ALARM OUT 1,2

LINK	AC 24V
GND	DC 12V

Item		Description
Video Out Port	Video signal output port connected to the monitor.
		ON: The camera is turned on and connected to the network
		properly.
	SYSTEM	Blinking: During DDNS setup, or in case of setup failure, or
System, Power		in a state of unstable network connection
Indicators		OFF: When the system is rebooting, or turned off
	POWER	ON: While the power is on
		OFF: If the power is off
Reset Button	Resets the camera settings to the default. Press and hold it for about 3
	seconds to turn off the system indicator and restart the system.
Power Port	Used to plug the power cable.
Network Port	Used to connect to the Network cable.
	ALARM IN	Used to connect the alarm input signal.
	1,2
I/O Port
	GND	Used for earth-grounding.
	ALARM OUT	Used to connect the alarm output signal.
	1,2

12_ overview