Verify the settings in the following sequence

appendix

	PROBLEM	SOLUTION

	I enabled Motion Detection Feature	y Verify the settings in the following sequence:
	under Motion Detection, but .jpg	A. NTP must be properly configured.
	files are not getting sent over FTP/	B. Motion Detection Feature must be enabled.
	SMTP even after motion detection	C. Alarm Video Transmission must be enabled.
	occurs at the FT camera.	D. Check for scheduling conflict.
		D. Check for scheduling conflict.

	Is it possible to configure Motion	y Yes. Motion Zone can be configured independently of whether or not
	Zone with Motion Detection
	Zone with Motion Detection	Motion Detection Feature is in use.
	Feature disabled?	Motion Detection Feature is in use.
	Feature disabled?

	A motion event took place but	y Check alarm output port settings.
	didn’t trigger an alarm.	y Check alarm output port settings.
	didn’t trigger an alarm.

78_ appendix

Page 78

Image 78

Samsung SNC-B2331P manual Verify the settings in the following sequence, NTP must be properly configured, Feature disabled?

Contents

Network Camera Overview English Overview FCC Statement Important Safety Instructions Contents Installing ActiveX Connecting to the cameraLogin Using the Live Screen Compatible PoE Switches Product FeaturesRecommended PC Specifications Compatible IP Routers Lens Options IP Installer CDWHAT’S Included CS Lens Front Side ConnectorAT a Glance Description System PowerRear Side GND Mounting the CS lens Disconnect the power before proceedingMounting the Lens Mounting the C lens Connecting the Auto Iris Lens connector Focusing Power Supply Connecting with Other DeviceConnecting to the monitor Network Connection Connecting to the I/O port box Alarm I/O Wiring Diagram HOW to USE the Keyboard Controller You can configure the camera settings using the Web Viewer Factory Defaults Main MenuProfile Camera Setup Camera IDIris Shutter MotionDNR SENS-UP White BAL You can specify a recording mode according to the sceneDAY/NIGHT Select Camera SET DAY/NIGHT AGC Color SUP Digital ZoomDetail Reverse Zone Setup Privacy Zone OSD Color Factory DefaultOthers You can set the font color of the user interface Language  The camera type may different, depend on the video signalSystem Info You can check the system information Network connection and setup Network Connection and Setup Setting the IP Router Connecting the Camera Directly to Local Area Networking Connecting to the camera from a local PC in the LAN IP Address Setup Buttons used in IP Installer URL Static IP SetupManual Network Setup Ddns registration has failed Network connection and setup Auto Network Setup Dynamic IP Setup Dynamic IP Environment Setup Port Range Forward Port Mapping Setup Connecting to the Camera from a Shared Local PCManual Port Range Forwarding Connecting to the Camera from a Remote PC VIA the Internet Connecting via URL If the Http port is other than Connecting to the CameraUsing URL Normally, you would Login To check the Ddns address Click Install ActiveX Control Installing ActivexFor Windows XP Service Pack 2 users Security warning popup appears, click Install Using the Live Screen Backup To capture the snapshotTo print out the screenshot To record a video Click on the scene to recordRecorded space, recording will be forcibly ended Click OK Accessing the Setup Screen Setup screen appears Contrast Adjust the contrast from 1 to Default SetupTo configure the video settings Quality Adjust the picture quality from 1 to To configure the IP settings Click Basic User User setup window appears To set the user account English To set the display language System SetupWhen done, click Apply Selected language will be applied To set the date/time To update the software To check the log informationSelect System Log Log information list appears To reset the system To set the Https Overlay Setup To set the textYou can display text on the screen Event Setup To set the event transfer functionVerified will be displayed English To set an alarm image FTP transfer The image is sent to the speciﬁ ed FTP address To set the alarm input Select Event Motion Motion Detection setup window appearsTo set the motion detection function To set a motion area Motion Detection function will operate on the selected area Network Setup To set the video transfer modeTo set the scheduled transfer To set the Ddns Gaming DAY ModeITS ALC Terminology CavlcBitrate Control CBRConstant Bitrate Specifications DSP CS/CRAM 4CIF HTTPS, SSL, Dhcp SetupNtsc ARP, DNS, DDNS, Vsip ~90% Dimension W72 X D139 X H60 Weight About 300g PowerPoE Power over Ethernet About 7W Frame Rate Ntsc EstimationHPelGOP size15 MPEG4 4CIF 30 FPS 15 FPS FPS MPEG4 VGA 264 VGA MPEG4 CIF 264 CIF Frame Rate PAL 25 FPS 13 FPS MPEG4 VGA Kbps 17 FPS MPEG4 CIF 264 CIF Troubleshooting Problem Solution Motion Detection Feature must be enabled Verify the settings in the following sequenceNTP must be properly configured Alarm Video Transmission must be enabled Preamble GPL/LGPL Software LicenseGNU General Public License We protect your rights with two steps Program, and can be reasonably Page Page No Warranty How to Apply These Terms to Your New ProgramsEND of Terms and Conditions Preamble Terms and Conditions Source Code Basic PermissionsProtecting Users Legal Rights From Anti-Circumvention Law Conveying Verbatim Copies Conveying Modiﬁed Source VersionsConveying Non-Source Forms Installed in ROM Additional Terms Acceptance Not Required for Having Copies Automatic Licensing of Downstream RecipientsPatents Valid No Surrender of Others FreedomUse with the GNU Affero General Public License GNU Lesser General Public License END of Terms and Conditions Preamble Page Page AAccompany the work with the complete corresponding machine Page Page How to Apply These Terms to Your New Libraries OpenSSL License No Event Shall the OpenSSL Original SSLeay License Copyright C1995-1998 Eric YoungAnd/or other materials provided with the distribution

Samsung SNC-B2331P Verify the settings in the following sequence, NTP must be properly configured

Models: SNC-B2331P

appendix

PROBLEM

y Verify the settings in the following sequence:

A. NTP must be properly configured.

B. Motion Detection Feature must be enabled.

C. Alarm Video Transmission must be enabled.

occurs at the FT camera.

D. Check for scheduling conflict.

Zone with Motion Detection

Motion Detection Feature is in use.

Feature disabled?

y Check alarm output port settings.

didn’t trigger an alarm.