Samsung SNC-B2335P user manual Static IP Setup, Manual Network Setup, Auto Set

network connection and setup

IPv4	Scans for cameras with the IPv4 setting.
IPv6	Scans for cameras with the IPv6 setting.
Search	Scans for cameras that are currently connected to the network.
	However, this button will be grayed out if neither IPv4 nor IPv6 is checked.
Auto Set	<IP Installer> will automatically configure the network settings for you.

Manual Set

You should configure the network settings manually.

Exit

Exits the IP Installer program.

STATIC IP SETUP

Manual Network Setup

Run <IP Installer.exe> to display the camera search list.

At the initial startup, both [Auto Set] and [Manual Set] will be grayed out.

M For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this function.

1.Select a camera in the search list.

Find the MAC (Ethernet) address labeled on the rear of the camera.

Both the [Auto Set] and [Manual Set] buttons will be activated.

2.Click [Manual Set].

The MANUAL SET dialog appears. The default values of <IP Address>,

<Subnet Mask>, <Gateway>, and <HTTP Port> of the camera will be displayed. The default <PASSWORD> is 4321.

3.In the <ADDRESS> pane, provide the necessary information.

MAC (Ethernet) Address : The MAC (Ethernet) address of the applicable camera will be set automatically so you don't need to input it manually.

36_ network connection and setup