how to use osd menu
• SHUTTER |
[ESC/A. Flicker/Manual(×128~1/120000 sec)] |
If Iris is set to Manual and Shutter Speed is set to |
ESC, Shutter Speed should have highest priority. |
•RELAY TYPE SETUP
Contact type of 1 Ch, RELAY OUTPUT is defi ned.
[NORMAL OPEN / NORMAL CLOSE]
If Shutter Speed is set to A. Flicker, to remove Flicker, | |
Shutter Speed should be set to 1/100 sec. for NTSC | |
and 1/120 for PAL. | |
• AGC | [OFF/NORMAL/HIGH] |
Enhances image brightness automatically in case that | |
luminance level of image signal is too low. | |
• DNR | [OFF/LOW/MIDDLE/HIGH] |
Enhances images by deducting noises when gain level | |
of images is too high. | |
• | [AUTO(2~128)/OFF] |
EDIT PASSWORD
[█ ]
1234567890 ABCDEFGHIJ KLMNOPQRST UVWXYZabcd efghijklmn opqrstuvwx
OK CANCEL
DISABLE
Activates Slow Shutter function when luminance of |
image (signal) is too dark. |
It is possible to set up the maximum number of frames |
piled up one on another by Slow Shutter function. |
SYSTEM SETUP
SYSTEM SETUP
<RELAY TYPE> <PASSWORD>
<SET HOME POSITION> <SET NORTH DIRECTION>
LANGUAGE ENGLISH <FAN/HEATER SETUP>
BACK
EXIT
•SYSTEM SETUP
You can set up RELAY TYPE, PASSWORD, HOME POSITION, NORTH DIRECTION, LANGUAGE.
M <FAN/HEATER SETUP> menu is only available in C7225 model.
RELAY TYPE SETUP
RELAY1 NORMAL OPEN
BACK
EXIT
•EDIT PASSWORD
You can defi ne 4 characters long password. If this function is set to ENABLE, it is required to type this password whenever to enter OSD MENU.
It is noted that DEFAULT PASSWORD : “4321”
36 – 10x Network Mini Smart Dome Camera
