Tektronix 071-0389-00 setup guide Getting Set Up

Getting Set Up

■The Startup Page prints. You can use the information on the Startup Page when installing the printer software.

N O T E

You can set the printer so that it does not print the Startup Page every time it is turned on. Refer to “Enabling and disabling the Startup Page” on the printer’s CD-ROM or web site.

■When the power-up sequence is complete, the green indicator is on steady (not blinking), the red indicator is off, and the front panel message reads Ready to Print.

N O T E

To ensure optimum printing performance and best ink economy, always leave the printer turned on. The printer features Intelligent Ready software that tracks when and how the printer is used; tracking these patterns over a rolling 3-week period, the printer automatically places itself in a standby power-saving mode during periods of non-use. The printer will automatically return to its Ready mode, just prior to a use period, avoiding any warm-up time.

Setup Guide 15