Tektronix 071-0389-00 setup guide Connecting a Scsi peripheral device

Getting Set Up

Connecting a SCSI peripheral device

N O T E

The Plus and Extended configurations include a SCSI port. The Standard configuration requires the Plus Feature Set (option Z840FP) for SCSI support.

The printer’s SCSI ID number is 7 and the optional IDE internal hard drive is 6; available SCSI ID numbers for peripheral devices are 0 – 5. The SCSI port is used for these peripherals:

■Scanner Allows you to use your printer as a color copier.

■External SCSI hard disk Provides additional storage for downloadable fonts, optional print collation, or expanded job accounting records.

Make sure that the printer and all SCSI devices are turned off before plugging or unplugging any cables.

1.Connect the cable to the SCSI port on your printer.

2.Connect the cable to the device.

3.Terminate the final SCSI device on the SCSI chain.

1

3

2

0389-11

N O T E

Refer to “Connecting peripheral devices” on the printer’s CD-ROM or web site for detailed information on connecting a SCSI device to your printer.

12Phaser 840 Color Printer