1.Plug the power cord into the power terminal on the rear side of the projector.

2-11 Connecting a DVD player/Cable/Satellite Box to HDMI/DVI

1.Connecting using an HDMI/DVI cable

•Connect the [HDMI 1/DVI IN] terminal on the back of the projector and the DVI output terminal of the DVD player/Cable/ Satellite box using an HDMI/DVI cable.

Connecting using an HDMI cable

•Connect the [HDMI 1/DVI IN] or [HDMI IN 2] terminal on the back of the projector and the HDMI output terminal of the DVD player/Cable/Satellite box using an HDMI cable.

2.When the connection is finished, connect the power of your projector and DVD player/Cable/Satellite box.

Using the Projector

1.Turn on the projector and press the [HDMI] button to select <HDMI1> or <HDMI2>.

• This projector does not support sound. (Separate audio system is needed for sound.)

2-12 Connecting a DVD player/Cable/Satellite Box via Component

1.Connect the [COMPONENT IN (Y/PB/ PR)] input port at the back of the projector to the Component port at the back of the DVD player/Cable/Satellite box with a Component cable.

2.When the connection is finished, connect the power of your projector and DVD player/Cable/Satellite box.

Using the Projector

1.Turn on the projector and press the [COMP] button to select <Component>.

Component Ports are marked as (Y/PB/PR), (Y, B-Y, R-Y) or (Y, Cb, Cr), depending on the manufacturer.

Installation and Connection

2-11