3-5-4.
3-5-4.MENU | DESCRIPTION |
|
|
Language | You can select the language used for the menu screen. |
Menu Position | You can move Menu Position up/down/left/right. | |
|
| |
Menu Transparency | You can set the transparency of menu. | |
| • <High> - <Medium> - <Low> - <Opaque> | |
|
| |
Menu Display Time | You can set the display time of the menu. | |
| • <5 sec> - <10 sec> - <30 sec> - <60 sec> - <90 sec> - <120 sec> - <Stay On > | |
|
| |
Auto Power On | If the power is supplied to the projector, it is turned on automatically without pressing the Power but- | |
| ton. | |
| • | <Off> - <On> |
|
| |
Sleep Timer | If there is no input signal for the specified time, the projector is turned off automatically. | |
| (There must be no button input from the remote control or on the top of the projector for the specified | |
| time.) | |
| • <Off> - <10 min> - <20 min> - <30 min> | |
|
| |
LED Indicator | You can turn the LED indicators on your projector on or off according to your requirements. | |
| • <Off> : This mode disables the operating LED. However, the LED will come on regardless of the | |
|
| LED setting when the power is turned on or off or when the projector is in an abnormal state. |
| • <On> : This mode enables the operating LED so that it can display the current operating state of | |
|
| the projector. |
|
| |
Buzz | You can turn on or off the sound when pressing one of the buttons on your projector. | |
| • | <Off> - <On> |
|
| |
Information | You can check external source signals, picture setup, PC picture adjustment. | |
Using |