| Symptoms | Troubleshooting |
|
|
|
Screen and | Cannot see picture images. | Be sure that the power cord of the projector is connected. |
External |
| Be sure that the proper input source is selected. |
Source |
| |
| Check that the connectors are properly connected to the ports | |
|
| |
|
| at the back of the projector. |
|
| Check the Remote Control batteries. |
|
| Be sure that the <Color>, <Brightness> settings are not at their |
|
| lower limit. |
|
|
|
| Poor color. | Adjust the <Tint> and <Contrast>. |
|
|
|
| Images are not clear. | Adjust the focus. |
|
| Check that the projection distance is either too far or too near |
|
| to the screen. |
|
|
|
| Strange noise. | If a strange sound continues, contact our Service Center. |
|
|
|
| The operating LED is lit up. | Refer to Corrective Actions According to LED Indications. |
|
|
|
| Lines appear on screen. | Because noise may occur when using your PC, adjust the fre- |
|
| quency of the screen. |
|
|
|
| No external device screen is displayed. | Check the operating status for the external device and check |
|
| whether the adjustment items, such as the Brightness and the |
|
| Contrast have been changed correctly in the <Mode> com- |
|
| mand screen of the Projector menu. |
|
|
|
| Only blue screen appears. | Be sure to properly connect the external devices. Check the |
|
| connection cables again. |
|
|
|
| Screen appears in black and white or odd | As mentioned above, check the adjustment items such as the |
| color./ screen is too dark or bright. | <Brightness>, <Contrast > and <Color> in the menu. |
|
| Check <Color Pattern> in the OSD menus. |
|
| If you want to restore various settings to their factory defaults, |
|
| run <Factory Default>from the menu. |
|
|
|
Troubleshooting |