bright. As the brightness of the lamp increases, the lamp lifetime can be reduced and the noise and power consumption may increase.
▶The sound output of your projector is temporarily stopped while the keystone is being changed.
▶The keystone is not compensated for in the On Screen Display (OSD).
Background You can set the Background that is displayed when there is no signal from the external device connected to the projector.If a signal is received, the Background you set disappears and a normal screen is displayed.
1)Logo
2)Blue
3)Black
Test Pattern Generated by the projector itself. Utilized as standard to optimize the installation of the projector.
1)Crosshatch : You can check whether the picture is distorted or not.
2)Screen Size : You can refer to picture format sizes such as 1.33:1 or 1.78:1.
Video Type Allows you to set the type of input signal when your projector fails to determine this automatically in PC mode.
▶In [PC] mode, this is only enabled if the input signal is AV
1)Auto
2)RGB(PC)
3)RGB(AV)
4)YPbPr(AV)
Usage | Color, | PC menu and | |
Sharpness,Tint | zoom | ||
|
Crosshatch
Screen
Size
RGB(PC)
When connecting the RGB output of a PC to the
DisableEnable
When connecting the RGB output of an RGB(AV) AV device (STB, DVD, etc…) to the D-
Sub terminal
When connecting the YPbPr output of an YPbPr(AV) AV device (STB, DVD, etc…) to the D-
Sub terminal
EnableEnable
EnableDisable
| Auto | Auto settings | - | - |
Reset | Using this function, you can reset various settings to the factory default settings. |
| ||
1)Factory Default : Changes the settings to the factory defaults.
2)Reset Filter Time : Resets the filter time.
Factory
Default
Reset Filter
Time
