Samsung SP-L200, SP-L220, SP-L250 manual Auto Adjustment Coarse Fine Reset

also be shown, though you can view more of the area. In this case, turn Overscan on.

Film Mode Using this function, you can set the display mode so it is optimized for playing movies.

1)Off

2)On

▶Film Mode can only be supported for the [AV], [S-Video], 480i, and 576i of AV Timing(D-Sub)signals .

PC	Eliminates or reduces noise that causes unstable screen quality, such as screen shaking. If
	the noise is not removed using Fine Adjustment, adjust the frequency to the maximum and
	then perform Fine Adjustment again.
	▶ It is only enabled for the PC Timing input of the D-Sub terminal.
	▶ Refer to PC Timing.
	1)	Auto Adjustment : Used to adjust frequency and phase of PC screen automatically.
	2)	Coarse : Used to adjust frequency when vertical lines appear on PC screen.
	3)	Fine : Used to fine tune the PC screen.
	4)	Reset : Using this function, you can reset the PC menu settings to the factory default
	settings.
Zoom	Enlarges the PC screen to 2X, 4X, or 8X.
	▶ This can only be adjusted when the input signal is PC Timing.

Auto

Adjustment

Coarse

Fine

Reset

Basic Functions Input Picture Setup Option

Screen

Adjustment

Install

Lamp Mode

* Click the Play()/Stop() button in the table below to view the video file.

Description Play/Stop

To tailor the picture to the installation location, you can invert the projected images vertically/horizontally.

1)Front-Floor : Normal Image

2)Front-Ceiling : Horizontal/Vertical Reversed Image

3)Rear-Floor : Horizontally Reversed Image

4)Rear-Ceiling : Vertically Reversed Image

Used to set the image brightness by adjusting the amount of light generated by the lamp.

1)	Eco : This mode is optimized for small screens smaller than 100 inches.	Eco
	This mode decreases the lamp brightness and power consumption in order to extend
	the lamp lifetime and reduce noise and power consumption.
2)	Bright : This mode maximizes the lamp brightness when the ambient illumination is	Bright