TUNER MODE
Selecting the tuner input source
1Select the TUNER input source with
»SOURCE« on the
–The most recently selected station is played (Last Station Memory).
–Display: »« and station name or the fre- quency.
Selecting presets
1 Press »+ PRESET
Stereo/mono reception
If the
Viewing RDS information
If an RDS station is being received, information can be opened up in the display.
1Press »DISPLAY« repeatedly to cycle through the information.
BAY 3 | Displays the name of the radio station |
(example) | being listened to. |
POP M | Displays the type of station being lis- |
(example) | tened to, e.g. Pop, Classic, News, etc. |
| If no station type code is transmitted, |
| »NO PTY« appears on the display. |
Text | Displays the message about the sta- |
| tion being listened to as ticker text (if |
| offered). |
18:00 | Current time. |
(example) |
|
97.90 | Displays the waveband and the fre- |
(example) | quency of station being listened to. |
1Press »7/!« to switch to mono reception.
– Display: »!« disappears.
2To switch back to stereo, press »7/!« again.
– Display: »!«.
RDS information
RDS (Radio Data System) is an information sys- tem which is transmitted additionally by most FM stations.
When the
ample »FANTASY« and »«.
Notes:
7It may take some time before all the RDS information is available.
7GRUNDIG has no influence on the correct- ness of this information.
Searching for RDS stations
1 Search for the RDS station by pressing »3« or »4« repeatedly until an RDS station is re-
ceived and »« appears in the display.
–If the reception is strong enough, the station name appears after a short time.
RDS time synchronisation
Some RDS stations transmit a time signal. If re- ception is good, the time information will update the time if you have selected the »CT ON« op- tion during the time setting, refer to "Setting the clock„ at the "SETTINGS" section.
Time synchronisation can take several minutes, and even with good reception the accuracy de- pends on the time signal being transmitted. The automatic time setting is always activated when the device is switched from standby to tuner mode and receives a RDS station.
Station types search (PTY)
1Press »REP« to call up the station type search.
2Repeatedly press »3« or »4« select the desired station type and confirm with »REP«.
–The search stops once a station of the se- lected type is found.
3Press »REP« to stop the search.