Grundig UMS 2020 manual Sleep Timer, Setting the timer, Activating and deactivating the timer

TIMER MODE---------------------------------------------------------------------------------------------------------------------------

Your hi-fi system has two timer modes:

–The timer, which switches the hi-fi system on at the set time, wakes you with the input source you selected and then switches off.

–The sleep timer, which switches the hi-fi sys- tem off at a preset time.

Notes

7The settings for the Timer mode can only operated with the buttons on the remote control.

7The time must be set on the hi-fi system.

7When this setting is being made, if no button is pushed for more than 10 seconds, the hifi system will end the process automatically. You then have to start again.

Timer

Setting the timer

1In standby mode, press and hold »TIMER SET« on the remote control.

–Display: »ON TIME« appears, then the clock digits for the hours flash.

2Setting the switch on time, press »5« or »6« to set the hours sand confirmwith »TIMER SET«. Press »5« or »6« to set the minutes and con- firm with »TIMER SET«.

–Display: »OFF TIME« appears, then the clock digits for the hours flash.

3 Setting the switch off time, press »5« or »6« to set the hours and confirm with »TIMER SET«. Press »5« or »6« to set the minutes and con- firm with »TIMER SET«.

– Display: the source appears.

4 Select the desired sound source (TUNER, CD, USB or SD) with »5« or »6«.

Confirmyour desired mode with »TIMER SET«.

– Display: the volume appears.

Note:

7If CD/USB/SD source is selected and there is an error, TUNER will be selected automatically.

5 Select the desired volume with »5« or »6«. Confirm with »TIMER SET«.

–Display: »«.

–The timer is now set and activated.

Activating and deactivating the timer

1In standby or during playback, press

»TIMER ON/OFF« on the remote control once.

–Display shows »« if activated, and disap- pears if deactivated.

Sleep Timer

Setting the sleep timer

1 Switch on the hi-fi system from standby by pressing »8«.

2Open the function with »SLEEP«.

– Display: »SLP 90« and »SLEEP« appears.

3 Set the switch-off time (»90«, »80« till »10«, »OFF«) by pressing »SLEEP«.

–Display: briefly, for example »SLP 30«, then the selected input source and »SLEEP«.

–The hi-fi system switches off after the selected time has elapsed.

Ending the sleep timer prematurely

1To switch off the sleep timer prematurely, keep pressing »SLEEP« on the remote control until »OFF« appears and »SLEEP« disappears in the display;

or

switch the hi-fi system to standby mode by pressing »8«.

20­ ENGLISH