Grundig UMS 2020 Inserting a memory card, Removing the memory card, Connecting the headphones

CONNECTION AND PREPARATION----------------------------------------

Inserting a memory card

The hi-fi system supports SD/SDHC and MMC memory cards.

Caution:

7The hi-fi system must be switched off while the memory card is being inserted. If it is not switched off, data can be lost.

	UMS 2020
SOURCE	UBS
PRESET	VOLUME
SD CARD	USB

1Switch off the hi-fi system by pressing »8«.

2Insert the card carefully into the »SD« card slot until it latches into place.

Notes:

7 Do not use excessive force when inserting the memory card. Only apply slight pres- sure.

7 The memory cards are resistant to dirt and moisture, but may only be inserted into the hi-fi system in a dry and clean condition.

7 Never remove memory cards during opera- tion. This can damage the memory card. This type of damage will invalidate your warranty.

Removing the memory card

Caution:

7The hi-fi system must be switched off while the memory card is removed. If it is not switched off, data can be lost.

1 Remove the memory card from the card slot by pressing the card inwards slightly until the latch is released. Then pull out the card.

Connecting the headphones

	UMS 2020
SOURCE	UBS
PRESET	VOLUME
SD CARD	USB

1Insert the headphone plug (ø 3.5 mm) into the »U« socket on the front side of the hi-fi system.

–The loudspeakers of the hi-fi system are switched off.

Note:

7Excessive sound pressure from the ear- phones or headphones can cause hearing loss.

ENGLISH 9­