•To browse projectors connected to the PC automatically, press <Tools>→<Auto Search>

•To group or directly register the projectors, select <List>→<Projector>, right-click over <Network Projector> under <Projector List>, and then select <Add Projector>.

•Specify the <Projector Name>, <IP Address> and <Group Name> to register, and then press <ADD>.

Any group whose name is not specified will automatically be named <Default Group>. To remove and / or rename a registered projector, right-click and then select <Delete> and / or <Rename> respectively.

If a projector is not displayed on the <Projector List >after registration, check if the network connection and the network settings are properly configured. See section 2-18, Connecting to a Network and section 3-5-3, <Setup>→<Network> for information and instructions.

To save or load the registered projector's information, select <File>→<Export Config>.

3-6

Using