Switching Your Television On and Off
ENG
The mains lead is attached to the rear of your television.
1 Plug the mains lead into an appropriate socket.
➢ The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
2Press the “I ” button (On/Off) on the front or side of the television.
Result: The Standby indicator on the front of the television lights up.
3Press the POWER (
) button on the remote control to switch the television on.
Result: The programme that you were watching last is re- selected automatically.
➢If you have not yet stored any channels, No clear picture appears. Refer to “Storing Channels Automatically” on page 20 or “Storing Channels Manually” on page 22.
4To switch your television off, press the “I ” button (On/Off) again.
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce the power consumption.
The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1 Press the POWER (
)button on the remote control.
Result: The screen is turned off and the Standby indicator on the front of the television lights up in red.
2To switch the television back on, simply press the POWER (
) button again.
➢You can also switch on by pressing the TV (
) or P 
/
button.
☛Do not leave your television in Standby mode for long periods of time (when you are away on holiday, for example). Turn your television off by pressing the “ I ” button (On/Off) on the front or side of the television. It is best to unplug the set from the mains and aerial.
12
