Samsung SP43W6, SP42Q2 manual Selecting the Sound Mode depending on the model, Dual-I↔

Selecting the Sound Mode (depending on the model)

The “DUAL I-II” button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either “Dual-I ” or “Stereo”, depending on the current transmission.

	Type of broadcast	On-screen indication
	Regular broadcast		Mono (Normal use)
	(Standard audio)
	Regular +		Mono		↔	Mono
NICAM	NICAM Mono		NICAM			(Normal)
Stereo	NICAM Stereo		Stereo		↔	Mono
			NICAM			(Normal)
		Dual-I		→ Dual-II→ Mono
	NICAM Dual-I/II	NICAM		NICAM (Normal)
		→				→
	Regular broadcast		Mono (Normal use)
	(Standard audio)
A2
	Bilingual or Dual-I/II	DUAL-I↔				DUAL-II
Stereo
	Stereo	Stereo ↔ Mono
					(Forced mono)

➢◆ If the receiving conditions deteriorate, listening will be easier if the mode is set to the Mono.

◆If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.

◆When receiving a mono sound in the AV mode, connect to the “AUDIO-L” input connector on the panel (front or side). If the mono sound comes out only from left speaker, press the DUAL I-IIbutton.

ENG

41