Samsung SPD-2300 - page 15

SPEED DOME CAMERA User’s Manual

29

ENGLISH

SPEED DOME CAMERA User’s Manual

28

5. Connect the heater and fan cables within the

housing to the fan heater PCB.

8. Remove the camera dome cover and then attach the housing dome cover.

6. Adjust and make the arrows marked on

the bottom of the camera

body face each other. an arrow

Camera Dome Cover Housing Dome Cover

7. Insert the camera into the housing by matching

the installation pin on the bottom of the camera

and the arrow inside the housing, and then

fasten the camera by inserting into the fastening

hole, turning the screw clockwise for fastening.

9. Connect the housing safety wires to the fixture

inside the mount installed on the ceiling.

10. Connect the video cable, the controller cable,

the power adapter cable and ID cable to

the camera holder.

11. Check out the connection of all parts and

the camera and install the completed outdoor

housing on the ceiling mount.

• Check out the input voltage of the power adapter before connecting the power.

• For an installation without housing, the camera can be installed with installation

template, fastening the cable and screw provided separately.

• It is necessary to tighten the screw to prevent unfastening.

• If the screw to prevent unfastening is not tight, the camera installed may fall due to

vibration or shock from the environment.

• Set up the Camera ID, the Termination Resistance and the Protocol Selection

Switch before installing the outdoor housing on the ceiling type mount.

Notes

Installation

Contents

Main 30X ENGLISH PTZ Dome Camera SPD-3000/2300 Users Manual SALES NETWORK P/No. : Z6806-0737-01A Page Warnings & Cautions Features Various Auto Surveillances Day & Night 30X/23X Zoom Lens with Auto- Focus Function Contents Precautions Body Camera Holder Camera Holder Connection Camera Holder Initial Settings Setting Communications Protocol Use the SW3 of installation bracket to set the communications protocol. 15 14 Setting Camera ID (Camera Holder) Setting Camera ID Switch (Camera Holder) Setting Baud Rate Based on DVR Model (Camera Holder) Protocol DVR Model Factory Setting: Camera ID = 1 The following 3 Camera IDs cannot be used. Setting Transmission Mode (Camera Holder) Set the termination using the ON/OFF of 2, 3, 4, 5 of the Dip Switch 3. Set the transmission mode using the ON/OFF of the Dip Switch 1. Setting RS-485/RS-422A Termination (Camera Holder) Setting Communication Method (Camera Holder) Controller Connection Terminal (Camera Holder) Setting Termination Resistance Alarm Connection Terminal (Camera Holder) Components and Accessories Accessories Preparation for Cable Products Sold Separately Cable Connection Installation of SPD-3000/2300 Camera Installation (outdoor Housing) Page OSD Menu Organization Page 35 34 Dome Camera User Menu Settings Select the Camera Setting on the Main Menu screen to control camera settings Camera Setting Menu In Focus menu, you can set up the focus mode among Auto, Manual or One Shot AF. Magnification of the Digital Zoom can be selected among Off, 2X~10X. Exposure Camera exposure can be controlled. White Balance When you select the AGC mode as OFF, you cannot use the SSNR function. Back Light AGC SSNR (Samsung Super Noise Reduction) Day & Night Others 2) Sequence Setting Sequence Setting Menu Page Page 3) P/T Setting 51 50 Camera ID (Default setting is ON.) : Camera ID indication is set up. P/T Setting 4) OSD Setting Camera Name : Camera name is set up. Camera Name Camera Name [ ] 53 Preset Name Preset Name Preset Name [ ] Sequence Status (Default setting is ON.) : Display of the Sequence Group is set up. 5) Alarm Setting 6) Initialization Setting 7) Status Product Structure Installation Product Structure and Installation Page SPD-3000 SPD-2300 Specifications