Samsung SPD-2300 Camera Installation (outdoor Housing)

SPEED DOME CAMERA User’s Manual

ENGLISH

SPEED DOME CAMERA User’s Manual

3) Indoor and Outdoor Housing (STH-330PI, STH-330PO)

This housing is used to install the speed dome camera on the indoor or outdoor

wall or ceiling. (For the indoor type, the fan and heater are excluded.)

4) Wall Type Mount (STB-270PW)

This item is used to install the indoor or outdoor housing for speed dome on the

wall.

5) Ceiling Type Mount (STB-496PP)

This item is used to install the indoor and outdoor housing

for speed dome on a concrete ceiling.

1. Fasten the ceiling mount on the ceiling.

2. Pull outside of the housing the safety wire fastened to the outdoor housing.

inside

3. Connect the fan heater PCB cable inside the

housing to the camera holder connector.

4. Match the arrow sign marked on the camera

holder to the arrow marked inside the housing

and then install the camera holder in the

housing.

outside

Installation

Camera Installation (outdoor Housing)

Contents

Main 30X ENGLISH PTZ Dome Camera SPD-3000/2300 Users Manual SALES NETWORK P/No. : Z6806-0737-01A Page Warnings & Cautions Features Various Auto Surveillances Day & Night 30X/23X Zoom Lens with Auto- Focus Function Contents Precautions Body Camera Holder Camera Holder Connection Camera Holder Initial Settings Setting Communications Protocol Use the SW3 of installation bracket to set the communications protocol. 15 14 Setting Camera ID (Camera Holder) Setting Camera ID Switch (Camera Holder) Setting Baud Rate Based on DVR Model (Camera Holder) Protocol DVR Model Factory Setting: Camera ID = 1 The following 3 Camera IDs cannot be used. Setting Transmission Mode (Camera Holder) Set the termination using the ON/OFF of 2, 3, 4, 5 of the Dip Switch 3. Set the transmission mode using the ON/OFF of the Dip Switch 1. Setting RS-485/RS-422A Termination (Camera Holder) Setting Communication Method (Camera Holder) Controller Connection Terminal (Camera Holder) Setting Termination Resistance Alarm Connection Terminal (Camera Holder) Components and Accessories Accessories Preparation for Cable Products Sold Separately Cable Connection Installation of SPD-3000/2300 Camera Installation (outdoor Housing) Page OSD Menu Organization Page 35 34 Dome Camera User Menu Settings Select the Camera Setting on the Main Menu screen to control camera settings Camera Setting Menu In Focus menu, you can set up the focus mode among Auto, Manual or One Shot AF. Magnification of the Digital Zoom can be selected among Off, 2X~10X. Exposure Camera exposure can be controlled. White Balance When you select the AGC mode as OFF, you cannot use the SSNR function. Back Light AGC SSNR (Samsung Super Noise Reduction) Day & Night Others 2) Sequence Setting Sequence Setting Menu Page Page 3) P/T Setting 51 50 Camera ID (Default setting is ON.) : Camera ID indication is set up. P/T Setting 4) OSD Setting Camera Name : Camera name is set up. Camera Name Camera Name [ ] 53 Preset Name Preset Name Preset Name [ ] Sequence Status (Default setting is ON.) : Display of the Sequence Group is set up. 5) Alarm Setting 6) Initialization Setting 7) Status Product Structure Installation Product Structure and Installation Page SPD-3000 SPD-2300 Specifications