Samsung SRP-350 specifications Introduction

WARNING

Violating following instructions can cause slight wound or damage the

appliance.

Keep the desiccant out of children’s	Install the printer on the stable surface.
reach.	If the printer falls down, it can be broken
If not, they may eat it.	and you can hurt yourself.
PROHIBITE		PRINTER
	PROHIBITE

Use only approved accessories and do	Do not touch the HEAD of printer with
not try to disassemble, repair or remodel	your hand.
it for yourself.	This can burn your hand or deteriorate
Call your dealer when you need these	printing quality.
services.

					HEAD
	DISASSEMBLING
	PROHIBITED
				PROHIBITE
		PRINER
	Do not let water or other foreign objects			Do not use the printer when it is out of
	in the printer.			order. This can cause a fire or an
	If this happened, switch off and unplug the			electrocution.
	printer before calling your dealer.			Switch off and unplug the printer before
				calling your dealer.
PROHIBITE
			PRINTER
				TO UNPLUG
						PRINTER
						DEALER

2

Warning - U.S.

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Notice - Canada

This Apparatus complies with class “A” limits for radio interference as specified in the Canadian department of communications radio interference regulations.

Get appareil est conforme aux normes class “A” d’interference radio tel que specifier par ministre canadien des communications dans les reglements d’interference radio.

Caution

Some semiconductor devices are easily damaged by static electricity. You should turn the printer “OFF”, before you connect or remove the cables on the rear side, in order to guard the printer against the static electricity. If the printer is damaged by the static electricity, you should turn the printer “OFF”.

INTRODUCTION

The SRP-350, SRP-350S, SRP-350P and SRP-350U Roll Printer are designed for use with electronic instruments such as system ECR, POS, banking equipment, computer peripheral equipment, etc.

The main features of the printer are as follows:

1.High speed printing : 35.5(1/6” Feed) lines per second.

2.Low noise thermal printing.

3.RS-232(SRP-350), RS-485(SRP-350S), Parallel(SRP-350P), USB(SRP-350U)

4.The data buffer allows the unit to receive print data even during printing.

5.Peripheral units drive circuit enables control of external devices such as cash drawer.

6.Characters can be scaled up to 64 times compared to it’s original size.

7.Bar code printing is possible by using a bar code command.

8.Different print densities can be selected by DIP switches.

Please be sure to read the instruction in this manual carefully before using your new SRP-350/SRP-350P.

NOTE : The socket-outlet shall be near the equipment and it shall be easy accessible.

3