D. Specification
Printing method | Thermal line printing | |
|
| |
Dot density | 180 X 180 dpi (7dots/mm) | |
|
| |
Printing width | 72.192 ± 0.2mm | |
|
|
|
Paper width | 79 | ~ 80 mm |
|
|
|
Characters per line (default) | 42 | (Font A) |
| 56 | (Font B) |
|
| |
Printing speed | 35.5 lines/sec(1/6” Feed) | |
| 150 mm/sec | |
|
| |
Receive Buffer Size | 4K Bytes | |
|
|
|
NOTE : Printing speed may be slower, depending on the data transmission speed and the combination of control commands.
Supply voltage | Input voltage | 120/230 VAC |
|
|
|
| Frequency | 50/60 Hz |
|
|
|
| Output voltage | +24 VDC |
|
|
|
Environmental | Temperature | 5 ~ 45 ℃ (Operating) |
Conditions |
| |
|
|
|
| Humidity | 30 ~ 80 % RH (Operating) |
|
| 10 ~ 90 % RH (Storage) |
|
| ; Except for paper |
|
|
|
LIFE * | Mechanism | 15,000,000 lines |
| Head | 1x108 pulse |
|
| |
|
| (Approximately 100 Km) |
|
|
|
| Auto Cutter | 1,000,000 Cut |
|
|
|
MCBF * | Mechanism | 37,000,000 lines |
| ||
|
|
|
*These values are calculated under printing level 2 with recommended paper at normal temperature.
*These values may vary with environment temperature, printing level, etc.
58 | 59 |
