P C D i s p l a y
Picture Quality Adjustment
The purpose of picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again. After the noise has been reduced,
Frequency Adjustment
Press TV/VIDEO on the remote
1 control.
Move the joystick up or down to select PC, then press the joystick to enter.
Press the Menu button.
2 Move the joystick down to select “PC”, then press the joystick to enter.
Move the joystick down to
3 select “Coarse”.
Remove picture noise (vertical stripes) on the screen by mov- ing the joystick right or left.
(If frequency is not set proper- ly, then vertical stripes will appear on the screen).
Fine tuning
Move the joystick down to
4 select “Fine”.
Remove picture noise (vertical stripes) on the screen by mov- ing the joystick right or left.
(If phase is not set properly, the picture may be blurry.)
Press the Menu to exit.
Changing the Position of the Image (Moving left, right, up and down)
After connecting the TV to your PC, adjust the position of screen if it is not
Press TV/VIDEO on the remote con-
1 trol.
Move the joystick up or down to select PC, then press the joystick to enter.
Press the Menu button.
2 Move the joystick down to select “PC”, then press the joystick to enter.
Move the joystick down to
3 select “Position”, then press the joystick to enter.
Adjust the position of screen by using the joystick button.
Press the Menu to exit.
NOTE
•If a PC signal is input to DVI, you can’t adjust the quality and position of picture.
To Initialize the Screen Position and Picture Quality Adjustment
After steps 1~2 above are completed, move the joystick down to select Recall. Press the joystick to initialize the screen position and picture quality.
NOTE
•When ‘Recall’ is active, the TV screen will become black and return to the original view about five seconds later. (This is a normal opera- tion.)
82 | 83 |
