Samsung ST43L2HD instruction manual Selecting a Signal Source Antenna or Cable for PIP

Special Features

Selecting a Signal Source (Antenna or Cable) for PIP

If the PIP source is TV during PIP ON, you can select the broadcasting source of PIP picture sepa- rately from the main picture. (If the main picture is ANT-B and the broadcasting sources are differ- ent, making adjustments is necessary.)

Press the Menu button. Move

1 the joystick down to select PIP, then press the joystick to enter.

Move the joystick down to

2 select “Air or CATV”.

If an antenna is connected,

3 the setting is “AIR.” If a Cable TV system is providing the sig- nal, move the joystick to the left or right until the appropri- ate type of cable system is displayed (“STD,” “HRC,” or “IRC”).

4 Press Menu to exit.

Swapping the Contents of the PIP and Main image

Press the Menu button. Move

1 the joystick down to select PIP, then press the joystick to enter. Quick way to access PIP Swap: Just press “Swap” on the remote control.

Move the joystick down to

2 select “Swap”.

Move the joystick to the right or

3 leftThe. channel in the PIP image will appear in the main image, and vice versa.

4 Press Menu to exit.

NOTE

• When ANT-B, Component mode, PC, or DVI is selected, the PIP Swap function doesn’t work.

66 67