Samsung STP-102P, STP-102S instruction manual Warning - U.S, Notice - Canada, Introduction

DATE: July. 2001

MANUAL REVISION 2.0

STP-102S / STP-102P

Operator's Manual

POWER ERROR

FEED	ON
		LINE

TEL : 82-31-210-5620

ELECTRO- MECHANICSFAX : 82-31-210-5589

Warning - U.S

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interface when the equipment is operated in a commercial environment. This equipment generates uses, and can radiate radio frequency energy and, if not installed and uses in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Notice - Canada

This Apparatus complies with class "A" limits for radio interference as specified in the Canadian department of communications radio interference regulations.

Introduction

The STP-102S and STP-102P Roll Printer is designed for use with electric instruments such as system ECR, POS, banking equipment peripheral equipment, etc.

The main features of the printer are as follows:

1.High speed printing

2.Low noise thermal printing.

3.RS-232 serial interface (STP-102S). Parallel interface (STP-102P).

4.The data buffer allows the unit to receive print data even during printing.

5.Different print densities can be selected by DIP switches.

Please be sure to read the instruction in this manual carefully before using your new STP-102S and STP-102P.

NOTE

The socket-outlet shall be near the equipment and it shall be easy accessible.