Samsung STP-102P, STP-102S instruction manual Running the Self-test, Code Table

Chapter 5. Running the Self-test

1.Self-test printing

1)Starting the self test

To start printing the self-test on a paper roll, hold down the PAPER FEED button and turn on the printer with the cover closed. The self-test prints the current printer settings, which provide the following information :

-control software version

-dip switch state

2)Standby state

After printing the current printer status, the printer prints the message "Please press the FEED BUTTON.". The LED indicator blinks and the printer enter the test printing standby state.

Press the FEED BUTTON to start test printing.

2.Ending the self-test

After a number of lines are printed, the printer indicates the end of the self-test by printing " ** TEST COMPLETED ** ".

If the self-test is completed, then you must reboot your printer. Followings are the self-test results with STP-102S and STP-102P.

Chapter 6. Code Table

The following pages show the character code tables. To find the character corresponding to a hexadecimal number, count across the top of the table for the For example, 4A=J.

13 14