Samsung STP-102P ESC * m nL nH d1...dk, ESC - n, ESC 3 n, Esc @, ESC D n1...nk NUL, ESC E n

ESC * m nL nH d1...dk

[Name]		Select bit-image mode.
[Format]		ASCII	ESC		*	m	nL nH d1 ... dk
		Hex	1B		2A	m	nL nH d1 ... dk
[Range]		Decimal	27		42	m	nL nH d1 ... dk
		m = 0, 1, 32, 33
		0 < nL < 255
		0 < nH < 3
[Description]		0 < d < 255
		Selects a bit-image mode using m for the number of dots specified by nL and
		nH, as follows.
		Number of data(k) = (nL + nH x 256) x 3
[Notes]		The nL and nH indicate the number of dots of the bit image in the horizontal
		direction.
		The number of dots is calculated by (nL + nH x 256).
		If the bit-image data input exceeds the number of dots to be printed on a line,
		the excess data is ignored.
		d indicates the bit-image data. Set a corresponding bit to 1 to print a dot or
		to 0 to not print a dot.
ESC - n
[Name]		Turn underline mode on/off.
[Format]		ASCII	ESC			-	n
		Hex	1B			2D	n
		Decimal	27			45	n
[Range]		0 < n < 2, 48 < n < 50
[Description]		Turns underline mode on or off, based on the following values of n:
	n			Function
	0, 48			Turns off underline mode.
	1, 49			Turns on underline mode (1-dot thick).
	2, 50			Turns on underline mode (2-dots thick).
ESC 2
[Name]		Select default line spacing.
[Format]		ASCII	ESC			2
		Hex	1B			32
[Description]		Decimal	27			50
		Set the line spacing to 1/6 inch.

25

ESC 3 n

[Name]	Set line spacing.
[Format]	ASCII	ESC	3	n
	Hex	1B	33	n
	Decimal	27	51	n
[Range]	0 < n < 255
[Description]	Sets the line spacing to n dots.

ESC @

[Name]	Initialize printer.		@
[Format]	ASCII	ESC
	Hex	1B	40
[Description]	Decimal	27	64
	Clears the data in the print buffer and resets the printer mode
	to the mode that was in effect when the power was turned on.

ESC D n1...nk NUL

[Name]	Set horizontal tab positions.
[Format]	ASCII		ESC	D	n1...nk	NUL
	Hex		1B	44	n1...nk	00
	Decimal		27	68	n1...nk	0
[Range]	1	< n < 255
	0	< k < 32

[Description]	Sets horizontal tab position.
[Notes]	n specifies the column number for setting a horizontal tab position
	from the beginning of the line.
	k indicates the total number of horizontal tab positions to be set.

ESC E n

[Name]	Turn emphasized mode on/off.
[Format]	ASCII	ESC	E	n
	Hex	1B	45	n
	Decimal	27	69	n
[Range]	0 < n < 255

[Description]	Turns emphasized mode on or off.
[Notes]	When the LSB is 0, emphasized mode is turned off.
	When the LSB is 1, emphasized mode is turned on.

26