Maintain tools and filter
Carton contents
Brushbar Replacement
1. Remove the tool from the pipe, and turn upside down.
Slide the switch to unlock position and remove bottom plate.
2.Remove brushbar and discard.
3.Inspect belt to ensure that it is in good
condition. If broken or cracked, please replace. (See below for details.)
4. With the curved ends facing down, slide end plates of brushbar into slots on the tool.
5. To replace bottom plate, insert the four tabs on edge of bottom plate into slots on front of tool. Pivot bottom plate down and snap closed.
Belt Replacement
1. Grasp turbine and pull firmly to remove.
2. Remove belt from turbine pulley. Replace with new belt.
3. With flat sides of turbine retainers pointing down, slide retainers into grooves in tool housing and snap into place.
4. Replace brushbar and bottom plate.
Cleaning Brushbar
Cut off pet hairs or threads surrounding brush by using scissors.
16_ Maintain tools and filter
