Using the TV Buttons on the Remote Control
★
Auto Power Off
GB
The Auto Power Off feature automatically turns off your VCR if no signal is received and you do not press any button for the selected
GB
| VCR STANDBY/ON |
| TV STANDBY/ON |
|
| SLOW |
|
|
| SHUTTLE | 1 |
|
|
| |
| 2 |
| |
|
| F.ADV | INDEX |
|
|
| |
2 | SELECT | INPUT | |
TV | VCR | ||
|
|
| REPEAT |
| CLR/RST | F.ADV | INDEX |
|
|
| |
| SELECT | INPUT | |
3 |
| VCR | |
|
|
| |
|
| 5 | REPEAT |
|
|
| 4 |
AUDIO |
| DISP./ | |
| VOL | PROG/TRK | |
|
| 5 |
|
Your VCR remote control will work with Samsung televisions and compatible brands.
To determine whether your television is compatible, follow the instructions below.
1Switch your television on.
2Point the remote control towards the television.
3Hold down the TV button and enter the
Brand | Codes | Brand | Codes |
|
|
|
|
SAMSUNG | 01 to 06 | PHILIPS | 02, 20, 22 |
AKAI | 09, 23 | SABA | 13, 14, 22 to 24 |
GRUNDIG | 09, 17, 21 | SONY | 15, 16 |
LOEWE | 02 | THOMSON | 13, 14, 24 |
PANASONIC | 08, 23 to 27 | TOSHIBA | 07, 16 to 19, 21 |
|
|
|
|
time.
1Press MENU on the remote control.
Result: The programming menu is displayed.
2Press the corresponding , ❷ or ➛, ❿ buttons to select the
EASY OPERATION option.
3Press the OK button to select this option.
Result: The EASY OPERATION menu is displayed.
4Press the corresponding or ❷ buttons, until the AUTO POWER OFF option is selected.
5Press the ❿ button, until you select the time of Auto Power off interval.
OFF 
2HOUR 
3HOUR 
6On completion, press MENU twice to exit the menu.
BONUS |
|
|
AUTO POWER OFF | :OFF | |
REPEAT PLAY | :OFF | |
NO. OF |
| |
INTERVAL REPEAT : 5 | ||
❷ | ❿ | END:MENU |
TV | VCR | INPUT |
6 |
| REPEAT |
|
| |
AUDIO |
| DISP./ |
VOL | PROG/TRK | |
6 |
|
|
Result: If your television is compatible with the remote control, it will switch off. It is now programmed to operate with the remote control.
➢If several codes are indicated for your television brand, try each one in turn until you find one that works.
☛When you change the batteries in the remote control, you must reprogramme the code, following the same procedure.
You can then control the television using the following buttons.
Child Door Lock System
With this mechanism you can prevent children from harming themselves or the VCR. It stops fingers and small articles from entering your VCR.
ECO Mode-Reducing Standby power consumption
TV | VCR | INPUT |
|
| REPEAT |
AUDIO |
| DISP./ |
VOL | PROG/TRK | |
|
| 7 |
Button |
| Function |
| ||
TV STANDBY/ON ➀ Used to switch the television on and off. | ||
|
| |
TV or VCR ➁ | Used to switch between the TV and VCR modes. | |
|
| Only the VOL (+ or – ) and TV STANDBY/ON |
|
| buttons are operational in VCR mode. |
|
|
|
| Used to enter a | |
|
| Example: For programme 12, press |
|
| by numeric buttons 1 and 2. |
|
|
|
INPUT | ➃ | Used to select an external source. |
|
| |
VOL + or – ➄ | Used to adjust the volume of the television. | |
|
| |
PROG/TRK ➅ | Used to select the required programme. | |
(or ❷) |
| |
|
|
|
DISP./ | ➆ | Used to switch between an external source and |
|
| the television tuner. |
➢The various functions will not necessarily work on all televisions. If you encounter problems, operate the television directly.
Low Power Mode reduces the Standby power consumption of the VCR when in Standby mode.
Useful, for example, when you are away from the house on holiday. It saves actually turning the VCR off.
1Press MENU on the remote control.
Result: The programming menu is displayed.
2Press the corresponding ,❷ or ➛, ❿ buttons to select the
USER SET option.
3Press the OK button to select this option. Result: The USER SET menu is displayed.
4Press the corresponding or ❷ buttons, until the ECO. MODE is selected.
5Press the ❿button to turn LOW(3Watts) mode on. Now, when the VCR is standby mode the front display panel will shut off.
Even the clock disappears. By pressing the VCR STANDBY/ON (STANDBY/ON) button again the display panel will reappear.
6On completion, press MENU twice to exit the menu.
PROG | OPTIONSOPTIONS | INSTALL | |
CLOCK | BONUS | LANG |
|
USER SET |
|
| |
❷➛❿ OK |
| END: MENU | |
OPTIONS |
|
|
|
OSD |
|
| :ON |
TAPE SELECT | :E180 | ||
COLOUR SYSTEM | :AUTO | ||
ECO. MODE |
| :OFF | |
IPC |
|
| :ON |
❷ | ❿ |
| END: MENU |
40 |
41
