Samsung SV-450X, SV-655X, SV-655B, SV-650X, SV-250B, SV-650B Tuning Your Television for the VCR

Tuning Your Television for the VCR

GB

★(SV-655B/SV-650B/

★(SV-450B/SV-255B/

★(SV-655X/SV-450X/

★(SV-650X)

VCR STANDBY/ON

2

S

★(SV-250B/SV-250X)

STANDBY/ON

2

S

You must tune your television for the VCR only if you are not using a RCA cable

➢To view pictures from your VCR when a RCA cable is used, the television must be set to the audio/video mode (AV).

1	Switch on the television.
2	Switch on the VCR by pressing STANDBY/ON on the front of the
	VCR or VCR STANDBY/ON (STANDBY/ON) on the remote
	control.
3	Select a programme position on the television to be reserved for
	use with your VCR.
4	Insert the video cassette in the VCR. Check that the VCR starts
	reading the cassette; if not, press ❿II button.
5	Start a scan on your television or set the television to UHF

REC MENU

4

OK

	channel 38.
6	Fine tune the television until the pictures and sound are obtained
	clearly.
7	If you cannot find the pictures and sound, or there is interference
	from nearby channels, it may be necessary to change the setting
	of the VCR output channel (see Setting the VCR Output Channel
	on page 17 and Problems and Solutions on page 43).
8	When the picture and sound are perfectly clear, store this channel
	at the desired programme position on the television.
	Result:	That programme is now reserved for use with your VCR.

14