NICAMSelecting the Colour Mode Intelligent Picture ControlIntelligent Picture Control ( Remote Control )24 25
GB GB
VCR VCR
VCR VCR
Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception
standard when you select AUTO.
➢◆When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
◆When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to
your TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1After pressing the MENU, press the OK or
❿.
Result: The Setup menu is displayed.
2Press the corresponding
,
❷
buttons to select the
User Setoption.
3Press the OK or
❿
to select this option.
Result:The User Setmenu is displayed.
4Press the corresponding
or
❷
buttons, until the Colour
Systemoption is selected.
5Press the OK or
❿
button to select Auto➝PAL➝MESECAM➝B/W.
Auto When playing back a cassette, the system standard is
automatically selected by the DVD-VCR.
B/W Black and White
6On completion, press RETURN three time to exit the menu.
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Colour System : Auto
NICAM : On
IPC : On
ShowView Extend : Off
User Set
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard
mono sound broadcast and you can select the desired sound.
Please refer to page 37.
1After pressing theMENU, press the OK or
❿.
Result: The Setup menu is displayed.
2Press the corresponding
,
❷
buttons to select the
User Setoption.
3Press the OK or
❿
to select this option.
Result: The User Set menu is displayed.
4Press the corresponding
or
❷
buttons, until the NICAM
options selected.
5To... Press OKor
❿
, until...
Mono mode Off is displayed.
Off: Only set at this position to record
the standard mono sound during a
NICAM broadcast if the stereo sound is
distorted due to inferior reception
conditions.
NICAM mode On is displayed.
On: Normally set at this position.
6On completion, press RETURN three times to exit the menu.
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Colour System : Auto
NICAM : On
IPC : On
ShowView Extend : Off
User Set
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1During playback, press the MENU button on the remote control.
Result: The Setup menu is displayed.
2Press the OK or
❿.
Result: The Setup menu is displayed.
3Press the corresponding
,
❷
buttons to select the
User Setoption.
4Press the OK or
❿
buttons to select this option.
Result: The User Set menu is displayed.
5Press the corresponding
or
❷
buttons, until the IPCoption is
selected.
6Press the OK or
❿
buttons to select the IPC (intelligent picture
control) option.
➢When intelligent picture control mode is On, the
sharpness
of the image is adjusted automatically.
7To adjust the sharpness manually, press the
❷
button to turn
the IPC mode Off.
8Press the
➛
or
❿
buttons until the picture is displayed according
to your preferences.
➢If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
9On completion, press the RETURN button again.
Colour System : Auto
NICAM : On
IPC : On
ShowView Extend : Off
User Set
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
On
Off
Auto
PAL
MESECAM
B/W
On
Off
1During playback, press the IPC button.
Result: The PICTURE menu is displayed.
2Press the
❷
button to turn the IPC (Intelligent Picture Control)
option Onand Off.
➢When Intelligent Picture Control mode is On, the
sharpness of the image is adjusted automatically.
3To adjust the sharpness manually, select Intelligent Picture
Control mode Off.
◆The horizontal picture adjusting appears.
4Press the
➛
or
❿
buttons until the picture is displayed according
to your preferences.
➢If you do not press a button within ten seconds, the
PICTUREmenu disappears automatically.
5On completion, press the IPC button again.
OK
5