Checking a Preset Recording
Cancelling a Preset Recording
Using the Timer Programming Feature
34 35
GB GB
The Timer Programming feature allows you to preset the DVD-
VCR to record a programme up to one month before that
programme is to be broadcast. Up to six programmes can be
preset.
☛Before presetting a recording, check that the date and
time are correct.
1Insert the cassette and press TIMER on the remote control.
Result: The timer selection is displayed.
2Press the OK button to select Standard option.
Result: The TIMER PROGRAMMING menu is displayed.
3Press
❿
to select the input source.
4Select the required station by pressing the
,
❷
buttons or
INPUT SEL.
to select the AV1, AV2 or AUX input sources.
5Press
❿
to select the recording day.
6Select the required day by pressing the
or
❷
buttons.
7Press
❿
to select the recording start time.
8Select the required hour value by pressing the
or
❷
buttons.
9Press
❿
to select the minutes.
10 Select the required minute value by pressing the
or
❷
buttons.
11 Press
❿
to select the recording stop time.
12 Select the required recording stop time by pressing the
or
❷
buttons, following the same procedure as when selecting the
recording start time.
13 Press
❿
to select the recording speed.
14 Press the
or
❷
buttons to select the SP (Standard Play), LP
(Long Play), Auto(Auto Tape Speed Select) recording speeds.
15 Press the
or
❷
buttons to toggle between the PDC
mode (marked On) and the non PDC mode (marked Off).
16 When you have finished, press the RETURN button.
17 Press the STANDBY/ON button to activate the timer.
Result: Before starting recording, the DVD-VCR compares
the timer duration with the remaining time on the
cassette.
➢Auto Tape Speed Select. The DVD-VCR’s “Auto Tape
Speed Select” function compares the duration of the
timer recording to the actual recording time remaining
on the tape loaded. If there is insufficient tape to
complete a timer recording in AUTO mode, the DVD-
VCR automatically switches to LP mode to record the
whole programme.
VCR VCR
VCR
OPEN/CLOSE
STANDBY/ON
17
You can check your preset recordings:
◆When you have finished presetting the DVD-VCR
◆If you have forgotten which programmes will be
recorded
1Press TIMER on the remote control.
Result: The timer selection is displayed.
2Press the OK button to select Standard option.
Result: The TIMER PROGRAMMING menu is displayed.
3Press the
or
❷
buttons to select the required programme.
4Press the
➛
or
❿
buttons to select and change any values as
required. For more details, refer to the previous page.
5On completion, press RETURN twice.
You can cancel any programmes that are:
◆Incorrect
◆No longer required
1Press TIMER on the remote control.
Result: The timer selection is displayed.
2Press the OK button to select Standard option.
Result: The TIMER PROGRAMMING menu is displayed.
3Select the programme to be cancelled by pressing the
or
❷
buttons.
4Press the CLEAR button to cancel the selected programme.
Result: All the recording information is deleted and the
broadcast will not be recorded.
5On completion, press RETURN twice. 4
Standard
ShowView
Timer Method
PR Day Start Stop Speed V/P
WE 1 19 : 00 19 : 30 SP Off
::
::
::
::
PR Date Start Stop Speed V/P
WE 1 19 : 00 19 : 30 SP Off
::
::
::
::
PR Date Start Stop Speed V/P
WE 1 19 : 00 19 : 30 SP Off
::
::
::
::