Clearing a Preset Station
21
GB
If you have stored a TV station:
◆That you do not require
◆At the wrong programme position
you can cancel it.
1After pressing the MENU, press the OK or
❿.
Result: The Setup menu is displayed.
2Press the corresponding
,
❷
buttons to select the Install
option.
3Press the OK or
❿
to select this option.
Result:The Installmenu is displayed.
4Press the corresponding
or
❷
buttons, until the Manual
Setupoption is selected.
5Press the OK or
❿
to select a Manual Setupoption.
Result:The TV STATION TABLEmenu is displayed.
6Press the corresponding
or
❷
buttons, until the required
preset TV station (PR) is selected.
7Press the CLEAR button.
8Repeat the same procedure from Step 6onwards until all the
required stations have been cleared.
9On completion, press the RETURN button four times to exit the
menu.
☛You do not need to preset the stations manually if you
have already set them automatically.
1After pressing the MENU, press the OK or
❿.
Result: The Setup menu is displayed.
2Press the corresponding
,
❷
buttons to select the Install
option.
3Press the OK or
❿
to select this option.
Result: The Install menu is displayed.
4Press the corresponding
or
❷
buttons, until the Manual
Setupoption is selected.
5Press the OK or
❿
to select a Manual Setupoption.
Result: The TV STATION TABLE menu is displayed.
6Press the
or
❷
buttons to select a programme number as
required.
7Press the
❿
button to preset the station.
Result: The MANUAL TUNING menu is displayed.
8Press the
➛
or
❿
buttons to start scanning channel.
Result: The frequency band is scanned and the first station
found is displayed.
9Press the
❷
button, until the DECODERis selected.
10 Press the
❿
button to activate or deactivate use of the decoder
for the TV station, if necessary.
11 Press the
or
❷
buttons until the NAMEis selected.
The station name is set automatically from the broadcast signal.
12 To change the programme’s name, press the
❿
button.
Result: The first letter of the name flashes.
13 To... Then...
Select a character Press the
or
❷
button until the
in the name required character is displayed
(letters, numbers or “-” character).
Move to the next or Press the
❿
or
➛
buttons
previous character respectively.
14 If you... Then...
Wish to store the ◆Press the
or
❷
buttons until the MFT
station displayed is selected.
◆Press the
➛
or
❿
buttons to adjust the
picture, if necessary.
◆Press OK to store the station
Do notwish to ◆Press the
or
❷
buttons until the CH
store the station is selected.
displayed ◆Press the
➛
or
❿
buttons to go on
scanning the frequency band and display
the next station
◆Go back to the beginning of Step 14
15 Repeat this procedure from Step 6onwards, until all the required
stations have been stored.
16 On completion, press the RETURN button three times to exit the
menu.
20
GB
VCR
Presetting the Stations Manually
Auto Setup
Manual Setup
Install
TV System : K
VCR Output CH : CH 36
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
MANUAL TUNING
PR :
CH : - - -
MFT : -
DECODER : OFF
NAME : - - - -
MEMORY : OK
RETURN
TV STATION TABLE
PR CH NAME DEC
1
2
3
4
5
SWAPPING : OK
DELETE : CLEAR RETURN
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Auto Setup
Manual Setup
Install
TV System : K
VCR Output CH : CH 36
PR CH NAME DEC
1 21
2
3
4
5
TV STATION TABLE
SWAPPING : OK
DELETE : CLEAR RETURN
VCR