![](/images/new-backgrounds/1232550/23255015x1.webp)
Connection
Connecting to Power
Use AC 24V / 300mA or DC 12V / 500mA power source.
For DC Power Type
•For DC power as the voltage drop according to the length of the cable in the above table, a camera may malfunction if there is an excessively long cable run.
Resistance of copper wire [at 20C˚ (68˚F)]
Copper wire size (AWG) | #24(0.22mm2) | #22(0.33mm2) | #20(0.52mm2) | #18(0.83mm2) |
Resistance ( Ω / m) | 0.078 | 0.050 | 0.030 | 0.018 |
Voltage Drop (V/m) | 0.028 | 0.018 | 0.011 | 0.006 |
*Voltage for camera operation: 12V DC ±10%
*Voltage drops in the above table are variable according to types of cable manufacturer.
Notes
•Be sure to connect power only after all the installation is complete.
•Note that AC or DC adaptor is not supplied with camera.
•Use the UL listed, class 2 power transformer of AC 24V adaptor.
•Ground should be connected to the GND terminal.
COLOR CCD CAMERA 14 User’s Manual
RS-485 communication control
Connecting to RS-485 Control Cable
CONTROL CABLE | SPEC |
RED (TRX+) | |
|
|
Using a
(1)The case which it controls from the PC
Using a
EX) SERIAL PORT OF THE PC(COM1) — SERIAL CABLE
--
(2)The case which it controls from the DVR or System Controller
It connects the
485 CONTROL BOARD CONNECTION TERMINAL | |
(+)CONNECTION TERMINAL | RED (TRX+) |
|
|
Notes
•When you construct external control systems for a camera control, please use to the SAMSUNG TECHWIN PROTOCOL or
•When you connecting to
COLOR CCD CAMERA 15 User’s Manual