Operating Your Camera
BACKLIGHT
Unlike conventional cameras, the
1.When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Function Setup switch so that the arrow indicates ‘BACKLIGHT’.
MAIN | SETUP |
SSDR | OFF |
WHITE BAL | ATW |
BACKLIGHT | OFF |
MOTION DET | OFF |
2.Select a desired mode using the Function Setup.
OFF : Not being used
BLC : Enables a user to directly select a desired area from a picture, and to view the area more clearly.
HLC (High Light Compensation) :
If the scene contains extremely bright light areas such as; from car headlight, the light can mask out much of the
-LEVEL : Adjust level of the HLC function.(LOW,MIDDLE,HIGH)
-MASK TONE : Change the brightness
-LIMIT : Enable to change the operating condition.
3. Select a desired mode using the Function Setup switch and press the Function Setup switch.
• Select ‘BLC’ to adjust the area to be | • HLC : Enable the user to change the level, | |||||||||
enhanced then adjust the level. |
| mask tone area. | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Notes
•For effective viewing of license plates, there is a minimum required illumination and the shutter speed needs to be faster than 1/200sec.
•Because there can be a difference in the effectiveness of HLC according to the amount of light area in the screen, optimize the installation angle for the best HLC performance.
•When dark, the HLC is only activated when a bright light exceeding a specific size. (In NIGHT ONLY mode.)
•The HLC is not activated in day light or when bright light is not present at night. (In NIGHT ONLY mode.)
•The HLC is not activated when the
COLOR DOME CAMERA 20 User Guide | COLOR DOME CAMERA 21 User Guide |
