Operating Your Camera
Motion Detection
This product has a feature that will detect movements of objects in 8 different areas on the screen. The camera detects an object’s movement by sensing disparity of outline, brightness levels and color. The camera sends a detection signal out via the MD output terminal and will zoom into a
MAIN | SETUP |
SSDR | OFF |
WHITE BAL | ATW |
BACKLIGHT | OFF |
MOTION DET | OFF |
FOCUS |
|
1. Please press the Function Setup Switch.
OFF : MOTION DETECTION mode is cancelled.
ON : Any motion in the selected areas is observed.
• AREA SEL : You can select 8 different sensitivity MOTION DET area.
| MOTION DET SENSTIVITY |
| ||||
AREA1 |
|
|
|
| AREA8 |
|
MIN |
|
|
|
| MAX |
|
|
|
|
| |||
•AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
•SEL POS(XPOS/YPOS) : You can control MD area size.
•SMART ZOOM : Smart zoom is operated in connection
with MOTION DETECTION. When the SMART ZOOM function is ‘ON’ while the MOTION DETECTION mode is ‘ON’, the zoom goes to the TARGET ZOOM position once motion is detected. Once the zoom action is finished and ‘DWELL TIME’ has passed, the zoom returns to the ‘START ZOOM’ position.
-START ZOOM : By moving the left or right direction of the Function Setup Switch in the ‘START ZOOM’ item to select the zoom position from 1x to 12x to be returned after the ‘SMART ZOOM’ action is over.
-TARGET ZOOM : By moving the left or right direction of the Function Setup Switch in the ‘TARGET ZOOM’ item to select the zoom position from 1x to 12x to be used during MOTION DETECTION.
-DWELL TIME : By moving the left or right direction of the Function Setup Switch in the ‘DWELL TIME’ item to select a time between 5 and 60 seconds for the dwell time before the zoom is returned to the ‘START ZOOM’ position. (5,7,10,15,20,30,40,60 sec)
Notes
Tips on Using the Motion Detection Feature
•The feature may not function properly under flickering light conditions.
•The camera interprets sudden changes in lighting and subsequent change in brightness of an object as motion.
•With the feature enabled, other algorithms may require additional time to operate.
Notes
•This system does not guarantee prevention of fire or theft. The manufacturer shall not be held responsible for any accident or damage incurred.
•Connect an external alarm device to MD Out on back of the camera.
COLOR DOME CAMERA 22 User Guide | COLOR DOME CAMERA 23 User Guide |
