Samsung SWA-8500S/EN manual Compatible Models, LED status Action

7.If the SWA-8500S does not connect, take the necessary steps according to the LED Indicator’s status

	LED status		Action
	On	Connected with	-
		the Soundbar
LINK (Blue)
	Blinking	Connection	Check if the Soundbar is turned on
		standby status	Repeat steps 3 through 6.
			Check if the Soundbar is turned on
			1. Press the ID SET button on the back
			of the Wireless Receiver Module with
			a pen tip for 5~6 seconds until the
			LINK LED indicator blinks (in Blue).
STANDBY (Red)	On	Connection failure

		5 Sec
L	R	ID SET
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω

ID SET

			2. Repeat steps 3 through 6.
Others	-	Errors	Contact a Samsung Service Centre.

Compatible Models

HW-M360	HW-M369	HW-M450	HW-M460
HW-M4500	HW-M4501	HW-M4510	HW-M4511
HW-M550	HW-M560

•• The model list is subject to change without further notice.

ENG - 10