Nortel Networks 8005AC, 8005DC, 8003AC, 8004AC, 8004DC manual Installing the jumper on an ESM

Installing the jumper on an ESM 8668 139

Securing the daughter card to the 8692 Series CPU

8Replace the 8692 Series CPU (with the newly installed daughter card attached) into the vacant chassis slot (see "Installing and replacing a module" (page 75)).

After you replace the 8692 Series CPU into the chassis, see the appropriate chassis and component installation guide to power up the chassis and verify a successful installation.

—End—

Installing the jumper on an ESM 8668

Install a jumper on the Metro Ethernet Services Module (Metro ESM 8668) to ensure that the ESM 8668 boots successfully when a SuperMezz is installed.

All ESM 8668 boards in your chassis must have a jumper installed.

Prerequisites

•Have the jumpers ready to install. You can order jumpers from Nortel with the MERS 8600 ESM Jumper Kit (DS1411033-E6).

Nortel Metro Ethernet Routing Switch 8600

Installation — Modules

NN46220-306 02.02 Standard

4.27 July 2008

Copyright © 2005-2007, Nortel Networks