Nortel Networks 8005AC, 8005DC, 8003AC, 8004AC manual Seating the backplane connectors 8010co chassis

84Installing Metro Ethernet Routing Switch 8600 modules and connecting equipment

Seating the backplane connectors: 8010co chassis

7Using a Phillips screwdriver, tighten the 2 captive screws to secure the module to the chassis ("Securing the module in the chassis: 8003, 8006, and 8010 chassis" (page 85) or "Securing the module in the chassis: 8010co chassis" (page 85)).

Make sure you securely tighten all captive screws for proper module operation. This ensures a good connection between the module and the backplane and prevents apparent module failure of properly functioning modules.

If a module failure occurs, check for possible backplane connection problems as a cause. Make sure the module is correctly seated in the backplane connector and the captive screws are securely tightened. If the module still fails to operate, contact Nortel customer support for assistance.

Nortel Metro Ethernet Routing Switch 8600

Installation — Modules

NN46220-306 02.02 Standard

4.27 July 2008

Copyright © 2005-2007, Nortel Networks