Nortel Networks 8005DC, 8003AC, 8004AC manual 8681XLW module LEDs Type Label Color/State Meaning

8681XLW module 55

"8681XLW module LEDs" (page 55)shows the location of the 8681XLW module LEDs.

Unlike other 8600 modules, the TX LED for the 8681XLR and 8681XLW modules is located below the RX LED.

8681XLW module LEDs

"8681XLW module LEDs" (page 55) describes the 8681XLW module LEDs.

8681XLW module LEDs

Type	Label	Color/State	Meaning
Port	TX	Green/Blinking	The port is transmitting data.
		Green/Steady	The port is enabled but not
			transmitting data.
		Off	The port did not detect a fault
			condition.
	RX	Green/Steady	The port has a link and is enabled.
		Green/Blinking	The port is receiving data.
		Amber/Steady	The cable is disconnected, the port
			is disabled, the link is down, or
			SONET errors are detected.
Module	Online	Green/Steady	The module has completed its
			power-on self-test and software
			initialization and is operating
			normally.
		Amber/Steady	The module slot is disabled.
		Off	The switch power is off. If the
			switch power is on, the module
			is going through its power-on
			self-test and software initialization.
			A module in this state is not yet
			functional.

Nortel Metro Ethernet Routing Switch 8600

Installation — Modules

NN46220-306 02.02 Standard

4.27 July 2008

Copyright © 2005-2007, Nortel Networks