Nortel Networks 8003AC, 8005DC, 8004AC 1000BaseSX 62.5 160 850, See Note 1000BaseSX 62.5 200 850

106Appendix A Metro Ethernet Routing Switch 8600 module technical specifications

Gigabit Ethernet minimum distance ranges

Transceiver/	Diameter	Modal	Advertised	Average	Average	Optical
Fiber type	(microns)	Band-	Range	Optical	Minimum	Wave-
(see Note 1)		width	(meters)	Transmit	Receiver	length
		(MHz/		Power	Sensi-	(nm)
		km)		(dBm)	tivity
					(dBm)
1000BaseSX	62.5	160	2 to 220	-9.5 to -4	-17	850
MMF			(see Note 2)
1000BaseSX	62.5	200	2 to 275	-9.5 to -4	-17	850
MMF			(see Note 3)
1000BaseSX	50	400	2 to 500	-9.5 to-4	-17	850
MMF
1000BaseSX	50	500	2 to 550	-9.5 to-4	-17	850
MMF			(see Note 4)
1000BaseLX	62.5	500	2 to 550	-5.2 to 0	-22	1300
MMF			(see Note 5)
1000BaseLX	50	400	2 to 550	-5.2 to 0	-22	1300
MMF			(see Note 5)
1000BaseLX	50	500	2 to 550	-5.2 to 0	-22	1300
MMF			(see Note 5)
1000BaseLX	9	N/A	2 to 10000	-5.2 to 0	-22	1300
SMF
1000BaseXD	9	N/A	Up to 50 Km	-5.2 to 0	-24	1550
SMF
1000BaseZX	9	N/A	Up to 70 Km	0 to 5.2	-22	1550
SMF
1000BaseAPD	9	N/A	Up to 96 Km	+2 to +6	-28	1550
SMF			(see Note 6)

Note 1: Multimode fiber = MMF; single mode fiber = SMF

Note 2: The TIA 568 building wiring standard calls for 160/500 MHz-Km multimode fiber

Note 3: The international ISO/IEC 11801 building wiring standard calls for 200/500 MHz-Km multimode fiber

Note 4: The ANSI Fibre Channel specification calls for 500/500 MHz/Km 50 micron multimode fiber and 500/500 fiber will be proposed for addition to ISO/IEC 11801

Note 5: Using LX optics on multimode fiber may require the use of DMD-compensating patch cords

Note 6: CWDM GBICs require a minimum of 5dB attenuation between transmitter and receiver. Safety margin includes normal 3dB plus 2.4 Sigma value for CWDM variation. Maximum distance is only achievable without OADM and OMUX in the path

Nortel Metro Ethernet Routing Switch 8600

Installation — Modules

NN46220-306 02.02 Standard

4.27 July 2008

Copyright © 2005-2007, Nortel Networks