Nortel Networks 8003AC, 8005DC, 8004AC, 8004DC, 8005AC manual Ethernet management port

		8692omSF module 71
Label	Color/State	Meaning
Fan 1, 2	Green/Steady	The specified fan is operating normally.
	Amber/Steady	The specified fan has failed.
Temp	Green/Steady	The temperature is normal for switch operation.
	Amber/Steady	The temperature of the switch has exceeded the maximum
		operating temperature.
Master	Green/Steady	The CPU subsystem on the module is performing diagnostics.
	Green/Blinking	This module is providing active CPU functions for the switch
		and is the master CPU module.
	Amber/Steady	The CPU subsystem is in a fault state.
	Off	The CPU subsystem on the module is up and is in standby
		mode.
Online	Green/Steady	The switch fabric portion of the module is online and is
		load-sharing.
	Amber/Steady	The switch fabric portion of the module failed diagnostics.
	Off	The switch fabric portion of the module is offline.

Ethernet management port

The Ethernet management port on the 8692omSF module is an MDI 10/100BaseT port that allows out-of-band management of the switch using a Web browser or Device Manager. You can also establish a Telnet or SSH (Secure Shell) session to access the CLI. Use this port to connect the switch to a network management station. The Ethernet management port has its own IP address but does not switch traffic to other ports in the chassis.

Note that you use this port only as a management port. This port provides out-of-band management for the 8692omSF module.

DCE/DTE switch

The DCE/DTE switch changes the pin assignments on the Console port and allows you to designate the connector as either DTE or DCE. For information about pin assignments for the Console port, see "Console serial port" (page 132).

Serial ports

The 8692omSF module provides two serial ports for attaching modem and console devices. The Console port provides terminal access to the 8692omSF module to use the CLI. The Modem port allows you to connect a standard modem for out-of-band, dial-up management. For information about pin assignments for these ports, see "Console serial port" (page

132)and "Modem serial port" (page 133).

Nortel Metro Ethernet Routing Switch 8600

Installation — Modules

NN46220-306 02.02 Standard

4.27 July 2008

Copyright © 2005-2007, Nortel Networks