Nortel Networks 8003AC, 8005DC, 8004AC manual Installing a module, Removing a module 8010co chassis

Installing and replacing a module 81

Removing a module: 8010co chassis

8If you are installing a replacement module, go to "Installing a module" (page 81). Otherwise, install a filler panel (see "Installing a filler panel" (page 75)).

—End—

Installing a module

Install a Metro Ethernet Routing Switch 8600 module.

You can install a Metro Ethernet Routing Switch 8600 module with the power on or off. If you install a module in the same chassis slot where the same type of module was previously installed, the previous configuration is maintained for that module in that slot. With the 8672ATME, 8672ATMM, and 8683POSM modules, the configuration is maintained only if the same type of MDAs are used. In all other cases, a module installed in an Ethernet Routing Switch 8000 Series chassis resets to factory defaults.

Prerequisites

•Review the antistatic precautions on "Installing and replacing a module" (page 75).

Nortel Metro Ethernet Routing Switch 8600

Installation — Modules

NN46220-306 02.02 Standard

4.27 July 2008

Copyright © 2005-2007, Nortel Networks