Nortel Networks 8003AC, 8005DC, 8004AC, 8004DC, 8005AC manual Ethernet management port, Cpu

66Metro Ethernet Routing Switch 8600 modules

Label	Color/State	Meaning
CPU	Green	The number of lit LEDs indicates the level of
Utilization		CPU activity as follows:
(8 LEDs)		1 LED = 12%	5 LEDs = 60%
		2 LEDs = 24%	6 LEDs = 72%
		3 LEDs = 36%	7 LEDs = 84%
		4 LEDs = 48%	8 LEDs = 100%
Power	Green/Steady	The specified power supply is operating
Supply		normally.
1, 2, 3
	Amber/Steady	The specified power supply has a fault.
	Off	A power supply is not present in the specified
		bay, or the power supply in the specified bay
		is not turned on.
Fan 1, 2	Green/Steady	The specified fan is operating normally.
	Amber/Steady	The specified fan has failed.
Temp	Green/Steady	The temperature is normal for switch operation.
	Amber/Steady	The temperature of the switch has exceeded
		the maximum operating temperature.
Master	Green/Steady	The CPU subsystem on the module is
		performing diagnostics.
	Green/Blinking	This module is providing active CPU functions
		for the switch and is the master CPU module.
	Amber/Steady	The CPU subsystem is in a fault state.
	Off	The CPU subsystem on the module is up and
		is in standby mode.
Online	Green/Steady	The switch fabric portion of the module is online
		and is load-sharing.
	Amber/Steady	The switch fabric portion of the module failed
		diagnostics.
	Off	The switch fabric portion of the module is
		offline.

Ethernet management port

Ethernet management port on the 8691omSF module is an MDI 10/100BaseT port that allows out-of-band management of the switch using a Web browser or Device Manager. You can also establish a Telnet session to access the CLI. Use this port to connect the switch to a network management station. The Ethernet management port has its own IP address but does not switch traffic to other ports in the chassis.

Nortel Metro Ethernet Routing Switch 8600

Installation — Modules

NN46220-306 02.02 Standard

4.27 July 2008

Copyright © 2005-2007, Nortel Networks